Rockwell 2.5 Inboard Caliper Mount Brackets and Tabs Rockwell Zipper Boot

Rockwell Zipper Boot

This is a replacement with the seal retainer

This 7" bracket is usually used on the front axle but can be used on the rear

These can be drilled out to 1" for rod ends without reducing misalignment

From crawling to full throttle hill assaults

Rockwell 2.5 Inboard Caliper Mount Brackets and Tabs Rockwell Zipper BootRockwell pinion brake mounting bracket. This bracket is for mounting the caliper toward the center of the axle. It WILL NOT work on the outboard side due to bearing cap bolt spacing. May help with leaf spring interference. Rotor diameter of 10. 063". Caliper remains flush with the top of the inspection cover. Cut from 3 8" steel with a new design allowing the bracket to be installed and removed without removing the pinion flange. Using the Toyota